|
|  FEATURES:
- The load is transferred to the wrapping area via a power or chain conveyor.
- The rotating arm machine begins the wrapping cycle automatically by rotating the film carriage around the load which stands and does not rotate.
- After wrapping, top sheet dispenser which on the side of the rotating tower, will add one sheet to the top load and then continually wrapping up and down.
- At the end of wrapping, the film tail is automatically cut and brushed down. Then load move away from wrapping area. The machine is ready for next load with film clamp.
* Rotating arm machine is better for heavy, light, fragile or unstable loads
* with PLC control
* auto cut,brush down and clamp device.
* wrapping failure detector
* No film or broken film detector
SPECIFICATIONS:
|
Model
|
PW-1225AHMF
|
|
Machine size |
L 2140 x W 6016 x H 4417 mm |
| Conveyor height |
850 mm |
| Load size |
L 1300 xW1100 xH 1530 mm (10layers), L 1300 x W1100 x H 1155 mm (7 layers) |
| Top sheet size |
W 1800 x D 1800 mm |
| Rotating arm speed |
0~30 rpm (adjustable) |
| Film carriage speed |
0~ 8 m /min. (adjustable) |
| Conveyor speed |
15 m /min. (adjustable) |
| PE film spec |
L 1500 m x W 500 mm x t 0.023 mm |
| Capacity |
over 33 pallets/hr for 7 layers, over 22 pallets/hr for 10 layers. |
|
|
